Product Data Sheet Safety Data Sheet Show all documents

Sikafloor®-91

A three-component solvent-free pigmented mortar screed based on epoxy resins.

A three-component solvent-free pigmented mortar screed based on epoxy resins.

  • Easy and fast to apply.
  • Solvent-free, no fire risk.
  • Excellent adhesion to substrate.
  • With the addition of Sikadur® -507 trowelling aid, the screed may be mechanically smoothed using a plastic coated disk.
  • Non-slip, non-skid finish.
  • Excellent abrasion resistance.
  • High mechanical strength.
  • Permeable to water vapour.
Product Data Sheet Safety Data Sheet Show all documents

Usage

As a non-slip, abrasion-resistant epoxy resin floorings of 5-8 mm thickness:
  • Industrial floorings subject to moderate or heavy loading
  • Workshop and factory floors
  • Machine shops and warehouses
  • Depots and loading ramps
  • Hangars
  • Stairs
  • Suitable for use on ventilated or non ventilated substrates such as:
  • Concrete and mortar.

Advantages

  • Easy and fast to apply.
  • Solvent-free, no fire risk.
  • Excellent adhesion to substrate.
  • With the addition of Sikadur® -507 trowelling aid, the screed may be mechanically smoothed using a plastic coated disk.
  • Non-slip, non-skid finish.
  • Excellent abrasion resistance.
  • High mechanical strength.
  • Permeable to water vapour.

Packaging

Comp. (A+B): 3 kg Unit.
Comp. C (Sikadur 506 EG): 30kg Bag.

Colour

Natural, light grey, yellow oxide, red oxide, chrome oxide green. Other colours available on request (minimum order 300 kg)..

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

Sikafloor -91 has been tested as per SCAQMD Rule 304-91.
Result: VOC Content <100 g/L
Product Information

Composition

Epoxy

Shelf life

12 months from date of production if stored properly in original unopened packing.
Note:
Component (A), Sikafloor® -9l pigmented, must be thoroughly stirred with a mechanical stirrer prior to each batching.
Segregation may occur after 10 hours.

Storage conditions

Store in dry condition at temperature between +5°C and +30°C

Density

2.1 - 2.2 kg/litre for finished screed
Technical Information

Compressive Strength

60 - 70 N/mm2

Tensile Strength

6 - 8 N/mm2

Tensile Adhesion Strength

> 1.5 N/mm2 (Concrete Failure)

Application

Application Information

Mixing Ratio

Sikafloor® -91

Flooring Screed:1:10 mix
Comp .(A), natural or pigmented2.54
Comp. (B)0.46
Comp. (C) (Sikadur506 EG) Parts by wt.
30

Substrate Temperature

Minimum substrate temperature: + 8C
Maximum substrate temperature: + 30C
Substrate temperature must be 3C above measured dew-point

Substrate Moisture Content

<4%

Pot Life

10°C

20°C

 30°C
60 min. 45 min. 20 min.

 

Curing Time

10οC
20οC30οC
Can be walked on after:36 hrs.24 hrs.12 hrs.
Light mechanical loading possible after:3 days2 days2 days
Fully cured after: 10 days7 days5 days
Application steps

MIXING

Stir Component (A) thoroughly with an electric stirrer prior to batching. Add Component (B) in the correct mix ratio and mix for 2-3 minutes at a low speed. Place the correctly batched quantity of Component (C) in the mixer (forced action type). Add the prepared resin mix (Components A+B) while the mixer is running, and continue to mix until a homogeneous and uniformly moist mix is obtained.

APPLICATION

Place the mortar while the primer coat is still tacky, and rake out evenly. Level with a beam laid across steel screeding rails and finish with a steel float.

CLEANING OF EQUIPMENT

  • Clean all tools and equipment immediately after use with Colma Cleaner.
  • Once hardened, the material can only be removed mechanically.
  • Wash soiled hands and skin thoroughly in hot soapy water.

Documents

سيكا فلور®-91- اطلب أون لاين

مونة إيبوكسية للأرضيات مكونة من ثلاثة مركبات خالية من المذيبات .

يستعمل لعمل مونة إيبوكسية مانعة للإنزلاق ومضادة للتآكل والبرى سمكها من 8:5 مم في الاتي:

أرضيات المصانع والورش وأرضيات المخازن والماكينات والمستودعات .
عنابر الطائرات والسلالم .

المميزات:

سهل و سريع الإستخدام.
خالى من المذيبات ، لايشكل خطورة من الحريق .
قوة إلتصاق ممتازة مع السطح .
سطح نهائى ضد الإنزلاق والتآكل والبرى .
قوة ميكانيكية عالية ويسمح بنفاذ بخار الماء