Sikafloor®-264
2-part high performance , solvent free , resin base epoxy coating
Sikafloor®-264 is a two part coloured epoxy resin. "Total solid epoxy composition acc. to the test method Deutsche Bauchemie e.V. (German Association for construction chemicals)"
- Good chemical and mechanical resistance
- Easy application
- Liquid proof
- Gloss finish
- Slip resistant surface possible
- Dust Proof
Usage
Sikafloor®-264 is used as:- Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- Seal coat for broadcast systems, such as multi-storey and underground car parks, maintenance hangars and for wet process areas, e.g. beverage and food industry
- Suitable to be used in different industrials such as Food & Beverage , Pharmaceuticals , Clean Rooms , Power Stations and Water plants .
- Mechanical rooms and Storage areas in adminstration buildings , exhibition halls and showrooms .
Advantages
- Good chemical and mechanical resistance
- Easy application
- Liquid proof
- Gloss finish
- Slip resistant surface possible
- Dust Proof
Packaging
Ready for use pre-proportioned units at 15 kg (A+B).
Colour
Resin - part A | coloured, liquid |
Hardener - part B | transparent, liquid |
Extended colour range |
RAL 1001, 6021, 7030, 7032, 7035, 7037, 7038, 7040, 7042, 9002
Other colours on request.
Under direct sun light there may be some discolouration and colour variation; this has no influence on the function and performance of the coating.
Product Details
SUSTAINABILITY
Conformity with LEED v2009 IEQc 4.2: Low-Emitting Materials - Paints and CoatingsAPPROVALS / CERTIFICATES
- Particle emission certificate Sikafloor-264 CSM Statement of Qualification – ISO 14644-1, class 4– Report No. SI 0904-480 and GMP class A, Report No. SI 1008-533.
- Outgassing emission certificate Sikafloor-264: CSM Statement of Qualification – ISO 14644-8, class 6,5 - Report No. SI 0904-480.
- Good biological Resistance in accordance with ISO 846, CSM Report No. 1008-533
- Fire classification in accordance with EN 13501-1, Report-No. 2013-B-2119/01, MPA Dresden, Germany, June 2013.
- Synthetic resin screed material according to EN 13813:2002, Declaration of Performance 02 08 01 02 05 00000003 1008, and provided with the CE marking.
- Coating for surface protection of concrete according to EN 1504-2:2004, Declaration of Performance 02 08 01 02 05 00000003 1008, certified by notified factory production control certification body 0921, certificate of conformity of the factory production control 2017, and provided with the CE marking.
- ISEGA Certificate of Conformity 40974 U15
Composition
Epoxy
Shelf life
12 months from date of production
Storage conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C.
Density
Part A | ~ 1,64 kg/l |
Part B | ~ 1,00 kg/l |
Mixed resin | ~ 1,40 kg/l |
All Density values at +23 °C.
Solid content by weight
~100 %
Solid content by volume
~100 %
Volatile organic compound (VOC) content
< 100 g/L
Shore D Hardness
~76 (7 days / +23 °C) DIN 53505
~75 (7 days / +23 °C) ASTM D2240
Abrasion Resistance
~35 mg (CS 10/1000/1000) (7 days / +23 °C) DIN 53109
~76 mg (CS 10/1000/1000) (7 days / +23 °C) DIN 53505
~60 mg (CS 10/1000/1000) (7 days / +23 °C) ASTM D4060
Compressive Strength
~ 53 N/mm² (28 days / 23 °C) (EN196-1)
~ 49 N/mm² (28 days / 23 °C) ASTM C579 Method B
Tensile Strength in Flexure
~ 30 N/mm² (28 days / 23 °C) (EN 196-1)
~ 20 N/mm² (28 days / 23 °C) ASTM D790
Tensile Strength
21 N/mm² ASTM D638
Tensile Adhesion Strength
> 1,6 N/mm² (failure in concrete) ASTM D4541
> 1,5 N/mm² (failure in concrete) ISO 4624
Chemical Resistance
Resistant to many chemicals. Contact Sika technical service for specific information.
Temperature Resistance
Exposure* | Dry heat |
Permanent | +50 °C |
Short-term max. 7 d | +80 °C |
Short-term max. 12 h | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is only occasional (steam cleaning etc.).
*No simultaneous chemical and mechanical exposure and only in combination with Sikafloor® systems as a broadcast system with approx. 3–4 mm thickness.
Application
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Note: Low temperatures and high humidity conditions increase the probability of blooming.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
< 4 % pbw moisture content.
Test method: Sika®-Tramex meter, CM-measurement or Oven-dry-method.
No rising moisture according to ASTM (Polyethylene-sheet).
Curing Time
Before applying Sikafloor®-264 on Sikafloor®-264 allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 30 hours | 3 days |
+20 °C | 24 hours | 2 days |
+30 °C | 16 hours | 1 days |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10 °C | ~ 72 hours | ~ 6 days | ~ 10 days |
+20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
+30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Note: Times are approximate and will be affected by changing ambient conditions.
MIXING
Prior to mixing, stir part A mechanically. When all of part B has been added to part A, mix continuously for 3 minutes until a uniform mix has been achieved. When parts A and B have been mixed, add the quartz sand and if required the Extender T and mix for a further 2 minutes until a uniform mix has been achieved. To ensure thorough mixing pour materials into another container and mix again to achieve a consistent mix. Over mixing must be avoided to minimise air entrainment.
Mixing Tools
Sikafloor®-264 must be thoroughly mixed using a low speed electric stirrer (300 - 400 rpm) or other suitable equipment. For the preparation of mortars use a forced action mixer of rotating pan, paddle or trough type. Don't use free fall mixers.
CLEANING OF EQUIPMENT
Clean all tools and application equipment with Thinner C immediately after use. Hardened and/or cured material can only be removed mechanically.
Documents
دهان برايمر من مركبين منخفض اللزوجة أساسه راتنج الإيبوكسى .
الإستعمالات
يستعمل كبرايمر ومادة رابطة على الآتى :
الخرسانة والحجارة الطبيعية والمونة الإيبوكسية .
المونة الأسمنتية ، البياض ، أسمنت الأسبستوس .
دهان الأرضيات الإيبوكسية الذاتى التسوية ومون الإصلاح الإيبوكسية .
المميزات
تغلغل وتشرب جيد مع قوة إلتصاق عالية .
سهل الإستخدام ويمكن إستعماله فى درجات حرارة منخفضة حتى ۱۰ °م .