Sikagard®-62
2 –Part Epoxy Protective Coating
Sikagard®-62 is a two part, rigid, 100% solids, coloured high build epoxy resin based protective coating.
- Solvent free
- Good mechanical and chemical resistance
- High build
- Impervious to liquids
- Easy to mix and to apply
Usage
- Chemical resistant protective layer on concrete, stone, cementitious mortars and renderings, epoxy cement, epoxy resin based products and steel
- Lining in storage tanks and silos
- Anti-corrosion coating on steel in food processing plants, sewage works, farms, agricultural enterprises, chemical and pharmaceutical facilities and beverage industry
Advantages
- Solvent free
- Good mechanical and chemical resistance
- High build
- Impervious to liquids
- Easy to mix and to apply
Packaging
Part A | 3.75 kg drums |
Part B | 1.25 kg drums |
Colour
RAL 7032 (pebble grey), other on request
Product Details
SUSTAINABILITY
According USGBC LEED Rating Sikagard®-62 conforms to the requirements of LEED EQ Credit 4.2: Low –Emitting Materials: Paints & Coatings SCAQMD Method 304-91, VOC Content < 100g/l
APPROVALS / CERTIFICATES
- Coating for concrete protection according the requirements of EN 1504-2:2004, Declaration of Performance 0206060100100000011008, certified by FPC Notified Body and provided with CE marking
- WRAS, test report No. M104991, 2011, Contact with water for wholesome purposes according BS 6920-1:2000
Composition
Epoxy resin
Shelf life
Part A: 12 months
Part B: 12 months
From date of production if stored properly.
Storage conditions
The packaging must be stored properly in original, unopend and undamaged sealed packaging, in dry conditions at temperatures between +5°C and +30°C. Protected from direct sunlight.
Density
Part A | approx. 1.45 kg/l |
Part B | approx. 1.02 kg/l |
Mixed resin approx. 1.37 kg/l
Density values determined at +23°C
Solid content
~ 100 %
Shore D Hardness
approx. 80 | (DIN 5305) |
Mechanical Resistance
Taber Abraser | CS 10/ 1000/ 1000 | 24.4mg |
Taber Abraser | CS 17/ 1000/ 1000 | 70 mg |
Taber Abraser | H 22/ 1000/ 1000 | 560.6mg |
Tensile Adhesion Strength
> 1.5 N/mm² to conrete | (ISO 4624) |
Chemical Resistance
Exposure period and performance rating |
Test medium | Test Temp. oC | 1 day | 7 days | 30 days | 12 Months |
Acetone | 20 | A | C | - | - |
Acrylonitrile | 20 | A | A | A | A |
Ethanol | 20 | A | A | A | - |
Ethanol / water 60: 40 | 20 | A | A | A | A |
Formic acid 10% | 20 | A | A | A | B |
Ammoniac 10% | 20 | A A | A A | A A | A AD |
Distilled water | 20 | A A A | A A A | A A A | A AD BD |
Detergents (e.g. liquid Ajax”) | 20 40 | A A | A A | A A | A AD |
Iron-Ill-chloride solution 35% | 20 40 | A A | A A | AD AD | AD AD |
Iron-ll-sulphate solution | 20 40 | A A | AD AD | AD AD | |
Acetic ester | 20 | A | B | C | - |
Acetic acid 20% | 20 40 | A A | A A | A A | C - |
Liquid manure | 20 40 | A A | A A | A A | AD AD |
Fuel oil (EMPA) | 20 40 60 | A A A | A A A | A A A | A A A |
Hydraulic fluids (e.g. "Arcosate","Skydrol" | 20 40 | A A | A A | A A | A D |
Javelle water 14% Cl2 | 20 | A | A | AD | C |
Potassium permanganate | 20 | A | A | B | - |
Kerosene | 20 40 | A A | A A | A A | A A |
Soda solution (saturated) | 20 40 | A A | A A | A A | A A |
Methyl ethyl ketone MEK | 20 | A | C | - | - |
Lactic acid 20% | 20 40 | A A | A A | A AD | C - |
A = Resistance to prolonged contact. B = Temporarily resistant , C = Breakdown of coating ,D = Discoloration of coating
For information about resistance to other media, please consult our technical Department
Temperature Resistance
Exposure | Dry heat |
Permanent | +50°C |
max. 7 days | +80°C |
max. 12 hours | +100°C |
Application
Mixing Ratio
Part A : Part B = 3 : 1 by weight
Layer Thickness
approx. 0.2 mm per layer
Ambient Air Temperature
+8 °C − +40 °C
Relative Air Humidity
< 80 %
Substrate Temperature
+8 °C − +4 0°C
≥3 °C above dew point, beware of condensation
Pot Life
Temperature | Time |
+10 °C | approx. 30 min |
+20 °C | approx. 20 min |
+30 °C | approx. 10 min |
Waiting Time / Overcoating
Temperature | Min. | Max. | Full cure |
+10°C | ~ 30 hours | ~ 3 days | ~ 14 days |
+20°C | ~ 10 hours | ~ 2 days | ~ 10days |
+30°C | ~ 6 hours | ~ 1 day | ~ 5 days |
Consumption
approx. 0.30 kg/m² per layer
APPLICATION INSTRUCTIONS
Prior to mixing stir part A mechanically. When all of part B has been added to part A mix continuously for 3 minutes until an uniform mixed has been achieved. Use a low speed electrical stirrer (300-400 rpm) to avoid air entrapment. To ensure proper mixing pour material into a clean container and stir again. Apply by brush, roller or airless spray.
CLEANING OF EQUIPMENT
Clean all tools with Thinner C immediately after use. Hardened and/or cured material can only be removed mechanically.