Product Data Sheet Safety Data Sheet Show all documents

Sika® Zinc Rich-1

One Component Epoxy Zinc Rich Primer

It is an epoxy one component primer, modified with zinc to provide protection against corrosion for steel and iron structures.

  • Highly bonded to regular steel .
  • Very good impact resistance.
  • Not applicable to be applied over galvanized steel .
  • Excellent resistance to water, weathering and abrasion.
  • Excellent rust inhibiting properties.
  • Excellent adhesion between reinforcement bars and concrete.
Product Data Sheet Safety Data Sheet Show all documents

Usage

As an anti corrosive primer directly applied on prepared metal surfaces in industrial and marine areas.

Advantages

  • Highly bonded to regular steel .
  • Very good impact resistance.
  • Not applicable to be applied over galvanized steel .
  • Excellent resistance to water, weathering and abrasion.
  • Excellent rust inhibiting properties.
  • Excellent adhesion between reinforcement bars and concrete.

Packaging

1 Kg and 5 kg tins

Colour

Metal Gray

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

Sika Zinc Rich®-1 has been tested as per SCAQMD Rule 1168.
Result: VOC Content < 400 g/L
Product Information

Composition

Epoxy modified Zinc with Zinc content > 45%

Shelf life

12 months from date of production if stored properly in original unopened packing

Storage conditions

In dry conditions far from direct sunlight.

Density

2.00 kg/I

Solid content by weight

65%
Technical Information

Chemical Resistance

The completely cured material is weather and water resistant, as well as mechanically resistant.

Application

Application Information

Product Temperature

Minimum 5 ºC

Drying Stage 6

Dry to Touch
20 min

Curing Time

4 - 7 days For full curing depending on Ambient Air Temperature , Relative Air Humidity 

Waiting Time / Overcoating

100 min 

Drying time

Depending on layer thickness and temperature final hardness is achieved.
Consumption

Consumption

300 gm/m2 For DFT 100 micron  
Application steps

SURFACE PREPARATION

Sand-blasting is recommended.
Substrate must be clean free from oil, grease and other impurities.

MIXING

Sika Zinc Rich® -1 is supplied ready for use. It must be stirred thoroughly before and during application, preferably with an electric stirrer.

APPLICATION

By Brush or Roller:
With round brush or normal roller. The material is easy to apply, if applied uniformly and richly.

By Spray:
Pressure vessel with high pressure air gun, 1.8 – 2.0 mm nozzle, 3-4 bar.
Apply perpendicularly in case of double coating.
The second coat applied minimum 1 hour after the first coat.

Documents

سيكا زنك ريتش®1- اطلب أون لاين

دهان ايبوكسى زنك لحماية جميع أشغال الحديد الكريتال

دهان لحماية الاسطح الحديدية في الاماكن الصناعية و المناطق البحرية و المنازل مثل كوبستات البلكونات و الأسوار و أعمال الفيرفورجيه والبوابات الحديده. يمكن أستخدامه قبل أى نوع دهان أخر او كدهان نهائى باللون الرمادى المميز.

معدل الاستهلاك:25. الي 30. كجم / للمتر المربع تقريبا