Product Data Sheet Show all documents

Sikaplan® WP 1100-15 HL

1.5 mm-thick PVC sheet waterproofing membrane for basements and tunnels

Sikaplan® WP 1100-15 HL is a flexible, 1.5 mm-thick, homogeneous sheet waterproofing membrane. It contains a signal layer and is based on high-quality polyvinylchloride (PVC-p).

  • Flexible in cold temperatures
  • Elastic material behaviour
  • Suitable for contact with acidic (soft) water and alkaline environments
  • Optimised workability and thermally weldable
  • Part of the complete waterproofing membrane system
  • Proven performance over decades
  • Contains no recycled materials and no DEHP (DOP) plasticisers
 
Product Data Sheet Show all documents

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

  • CE marking and declaration of performance based on EN 13491:2004/A1:2006 Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures

  • CE marking and declaration of performance based on EN 13967:2012 Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and characteristics
Product Information

Composition

PVC-p

Shelf life

5 years from date of production

 

Storage conditions

The Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between +5 °C and +35 °C. Protect the Product from direct weather exposure. Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to the packaging.

Effective thickness

1.50 mm (-0.07 mm / +0.15 mm)

(EN 1849-2)

Mass per area

1.95 kg/m² (-0.09 kg/m² / +0.19 kg/m²)

(EN 1849-2)
System information

System structure

Ancillary products:

  • Sika® FlexoDrain

  • Sikaplan® Geotextiles

  • Sika® Drains

  • Sika® W Tundrains

  • Sikaplan® WP Drainage Angles

  • Sikaplan® WP Disc

  • Sika® WP Waterbars

  • Sikaplan® WP Tape System

  • Sikaplan® WP Control Socket

  • Sikaplan®-8 Separation

  • Sikaplan® WP Trumpet Flange

  • Sika® Anchors

  • Sikaplan® WP Protection Sheets
Technical Information

Resistance to impact

Method A, 500 g falling weight

Watertight at 750 mm drop height

Method B

≥ 750 mm

Resistance to static loading

No perforation at 20 kg for 24 h

(EN 12730)

Resistance to static puncture

1.8 kN ± 0.2 kN

(EN ISO 12236)

Resistance to root penetration

Pass

(CEN/TS 14416)

Tensile strength

Longitudinal (MD)

17 N/mm² ± 2 N/mm²

Transversal (CMD)

16 N/mm² ± 2 N/mm²

Longitudinal (MD)

17 N/mm² ± 2 N/mm²

Transversal (CMD)

16 N/mm² ± 2 N/mm²

Burst strength

Maximum burst stress

6.0 N/mm2 ± 0.6 N/mm2

Elongation at break

> 70 %

Resistance to tear

Longitudinal (MD)

≥ 400 N

Transversal (CMD)

≥ 400 N

Joint shear resistance

> 750 N/50mm

(EN 12317-2)

Service temperature

Maximum

+35 °C

Minimum

-10 °C

Foldability at low temperature

No cracks at -20 °C

(EN 495-5)

Watertightness

Method B, 24 hours at 60 kPa

Pass

Water permeability

< 10-6 m3·m-2·d-1

(EN 14150)

Resistance to oxidation

Change in tensile strength, aged 90 days at +85 °C

< 15 %

Change in elongation, aged 90 days at +85 °C

< 15 %

Durability of watertightness against chemicals

Calcium hydroxide, aged 28 days at +23 °C, tested 24 hours at 60 kPA

Pass

Resistance to UV exposure

Not permanently UV stable

Resistance to weathering

Not resistant to permanent weathering

Behaviour after heat welding

Behaviour of weld in shear test

Break occurs outside the seam

Peel resistance of welded seam

No failure of the joint

Dimensional change after heat

Longitudinal (MD), aged 6 hours at +80 °C

< 2 %

Transversal (CMD), aged 6 hours at +80 °C

< 2 %

Durability of watertightness against ageing

Aged 12 weeks at +70 °C, tested 24 hours at 60 kPa

Pass

Reaction to fire

Class E

(EN 13501-1)

Application

Application steps

SUBSTRATE QUALITY

For information on substrate quality and pre-treatment, refer to the following Sika® method statements:

  • Sikaplan® WP sheet membrane (PVC) system for waterproofing basements

  • Sikaplan® WP sheet membrane (PVC) system for waterproofing tunnels

APPLICATION

IMPORTANT

Strictly follow installation procedures

Strictly follow installation procedures as defined in Method Statements, application manuals and working instructions which must always be adjusted to the actual site conditions.

For information on application, refer to the following Sika® method statements:

  • Sikaplan® WP sheet membrane (PVC) system for waterproofing basements

  • Sikaplan® WP sheet membrane (PVC) system for waterproofing tunnels

 

IMPORTANT

Application by trained personnel

The application of this Product must only be carried out by an applicator that is trained or approved by Sika. The applicator must also be experienced in this type of application.

IMPORTANT

Ventilation in confined spaces

Always ensure good ventilation when applying the Product in a confined space.

IMPORTANT

Avoid permanent contact with bitumen and plastics

The Product is not resistant to permanent contact with bitumen and some types of plastics other than PVC.

  1. For use over or adjacent to these materials, apply a separation layer of polypropylene geotextile (≥ 150 g/m²).

Documents