Product Data Sheet Show all documents

SikaShield® P25 PE EG 3 mm

Reinforced plastomeric bituminous waterproofing membrane torch applied (APP)

SikaShield® P25 PE EG 3 mm is a high performance plastomeric torch-on sheet waterproofing membrane.
It is based on APP modified bitumen, reinforced with polyester non-woven fabric, faced with a polyethylene film on both sides. Suitable for use in tropical and hot climatic conditions.

  • Resistant to ageing
  • Good tensile strength and elongation
  • High resistance to water vapour
  • Good dimensional stability
  • Flexible at low temperatures
  • Easy to install using the torch-on method
  • Good resistance to mechanical impact
Product Data Sheet Show all documents

Usage

  • Applications subject to moderate mechanical stress.
  • Waterproofing for wet areas, mechanical rooms
  • Slab on Grade.
  • Waterproofing of underground structures.  

Advantages

  • Resistant to ageing
  • Good tensile strength and elongation
  • High resistance to water vapour
  • Good dimensional stability
  • Flexible at low temperatures
  • Easy to install using the torch-on method
  • Good resistance to mechanical impact

Packaging

Length 10,00 m
Width 1,00 m

Colour

Top surfacePolyethylene film
BackingPolyethylene film

Product Details

Product Information

Shelf life

12 months from the production date

Storage conditions

Rolls should be stored in an upright position in a flat properly ventilated and protected against direct sunlight, rainwater, snow and ice etc.

Effective thickness

3 mm (± 5 %)

( EN- 1848)
Technical Information

Resistance to static puncture

15 Kg

(EN 12730: 2001)

Resistance to dynamic puncture

700 mm

(EN 12691)

Tensile strength

Longitudinal600 N/5 cm ± 20 %
Transversal400 N/5 cm ± 20 %

Elongation

Longitudinal≥30%
Transversal≥30%

Tear strength

Longitudinal150 N ± 30 %
Transversal150 N ± 30 %

Resistance to tear

Longitudinal450 N  ± 30 %
Transversal350 N  ± 30 %

Joint shear resistance

Longitudinal450 N/5 cm  ± 20 %
Transversal350 N/5 cm  ± 20 %

Flexibility at low temperature

0  °C

(EN- 1109)

Flow resistance

120°C

(EN 1110)

Water absorption

Less than 1%

(ASTM D-5147)

Watertightness

60 Kpa

( EN-1928:2000)

Documents